Repair pressure washer

26/05/2021 Uncategorized

7 Steps to Fix a Leaking Pressure Washer Tank

Pressure washers are powerful tools that can save you time and money by cleaning your driveway, sidewalks, decks, patios, and other outdoor surfaces. But there are many things that can go wrong with these machines, so it’s important to know how to repair them.

But with these seven tips, you can save yourself some time and money.

If you notice any signs of leakage, such as water dripping out of the hose, then you need to stop what you’re doing and take care of the problem right away. You should also make sure that the pressure washer has enough water in its tank before starting to use it.

Check the hose connections.

One of the first things you should check is the hose connection. Make sure that there aren’t any kinks or other issues with the hose. Also, make sure that the nozzle isn’t clogged up.

Clean out the filter

If the hose connection is fine, then you need to clean out the filter. This will help prevent future leaks. You can use a garden hose to do so. Simply turn off the water supply to the pressure washer, remove the cap at the end of the hose, and let the water flow through the hose until it runs clear. Then, replace the cap and turn the water back on.

Replace the washer pump.

If the hose connection isn’t the problem, then you should check the pressure washer pump. There are two common issues with pumps. One issue is that the pump has been worn down by too much use. Another issue is that the pump is clogged. To test the pump, simply turn the power switch on and off while holding the trigger button down. If the pump starts to run smoothly, then there is no blockage. However, if the pump does not start up after several tries, then you should replace the pump.

Test the water supply line.

Once you have determined that the pump is functioning properly, you will need to determine whether the hose connection is the cause of the leak. You can do this by turning the power switch on and testing the hose connection. If the hose connection leaks, then you will need to replace the hose.